The Dragino WQS-NB is a Main Unit is advanced instruments designed for comprehensive water quality monitoring across various applications. They are ideal for monitoring tap water, industrial water, environmental water, and wastewater,etc,which ofer precise and reliable measurements to ensure water quality standards are met.

The Dragino WQS-NB is a Main Unit supports 1-3 probes. supports connecting 1 to 3 water quality probes, including EC, pH, DO, ORP, and TS probes.

 It detects water quality parameters, and uploads the value via wireless to NB-IoT Server.

WQS-NB supports BLE con­figure and wireless OTA update which makes user easy to use.

WQS-NB is powered by 8500mAh Li-SOCI2 battery , it is designed for long-term use up to several years.

The Dragino WQS-LB is a Main Unit is advanced instruments designed for comprehensive water quality monitoring across various applications. They are ideal for monitoring tap water, industrial water, environmental water, and wastewater,etc,which ofer precise and reliable measurements to ensure water quality standards are met.

The Dragino WQS-LB is a Main Unit supports 1-3 probes. supports connecting 1 to 3 water quality probes, including EC, pH, DO, ORP, and TS probes.

 It detects water quality parameters, and uploads the value via wireless to LoRaWAN Server.

WQS-LB supports BLE con­figure and wireless OTA update which makes user easy to use.

WQS-LB is powered by 8500mAh Li-SOCI2 battery , it is designed for long-term use up to several years.

The Dragino LWL04 is a LoRaWAN Water Leak Sensor. When there is water between the bottom 3 metal posts, the LWL04 indicates a water leak event and uplink to IoT server via LoRaWAN network.

The Dragino LWL04 does not need to be fixed, only placed on the ground. The bottom three metal columns can adjust the height. Only when there is water between the three metal columns, it will cause a short circuit alarm.

LWL04 can be activated from the bottom of the housing with a magnet, and the light will indicate when the magnet is close. Its main unit has a sealing ring, which can achieve IP65 waterproof.

LWL04 is powered by CR123A non-rechargeable battery and target for long time use, these batteries can provide about 16,000 ~ 70,000 uplink packets, which result in 2 ~ 10 years battery life. After battery running out, user can easily open the enclosure and replace with CR123A batteries.

The LWL04 will send periodically data every day as well as for each water leak event. It also counts the water leak times and calculate last water leak duration. User can also disable the uplink for each water leak event, instead, device can count each event and uplink periodically.

Each LWL04 is pre-load with a set of unique keys for LoRaWAN registration, register these keys to LoRaWAN server and it will auto connect after power on.

The Dragino LTC2-LB Industrial LoRaWAN Temperature Transmitter is designed to monitor temperature for different environment. It supports to read PT100 probe and convert the value to temperature and uplink to IoT server via LoRaWAN protocol.

LTC2-LB supports Datalog feature. User can retrieve the sensor value via LoRaWAN downlink command.

LTC2-LB supports BLE configure and wireless OTA update which make user easy to use.

LTC2-LB is powered by 8500mAh Li-SOCI2 battery, it is designed for long-term use up to several years.

WSS-09 is designed to support the Dragino Weather station solution. The 9 in 1 weather station Sensors can measure below values: Wind Speed, Wind Direction, Temperature, Humidity, Air Pressure, Illumination, PM2.5, PM10, Noise & Rain Gauge. The LoRaWAN transmitter use RS485 interface to communicate with the 9 in 1 weather station. It can also connect 3rd party RS485 sensors to measure more environment data. It also has a pulse counting input which can be used to connect tipping bucket Rain Gauge.

WSS-08 Optical Rain Guage is a weather monitor instrument to monitor rainfall. WSS-08 is designed to auto support the Dragino Weather station solution. It has a pulse counting input which can be used to connect tipping bucket Rain Gauge.

The Dragino Weather Station Kit is designed for measuring atmospheric conditions to provide information for weather forecasts and to study the weather and climate.

The Weather Station Kit includes a LoRaWAN transmitter WSC2-L, a 9 in 1 Weather Station WSS-09 and a Rain Gauge WSS-08.

Please note that the WSC2-L only includes the transmitter, and the 9 in 1 Weather Station WSS-09 and Rain Gauge WSS-08 need to be purchased separately.

The 9 in 1 weather station kit can measure below values: Wind Speed, Wind Direction, Temperature, Humidity, Air Pressure, Illumination sensor, PM2.5, PM10, Noise & Rain Gauge.

The LoRaWAN transmitter use RS485 interface to communicate with the 9 in 1 weather station. It can also connect 3rd party RS485 sensors to measure more environment data. It also has a pulse counting input which can be used to connect Rain Gauge.

WSC2-L is full compatible with LoRaWAN Class A protocol, it can work with standard LoRaWAN gateway.

The Dragino CS01-NB/NS is a 4 Channels Current Sensor Converter. It can convert the reading from current sensors and upload to IoT server via NB-IoT Network.

CS01-NB.NS can be used to monitor the machine running status and analyze power consumption trends.

The CS01-NB/NS supports maximum 4 current sensors. The current sensors are detachable and can be replaced with different scales.

CS01-NB/NS supports BLE con­figure and wireless OTA update which makes user easy to use.

CS01-NB/NS is powered by 8500mAh Li-SOCI2 battery or solar panel with Li-ion battery, it is designed for long-term use up to several years.

AIS01-LB is a LoRaWAN AI Image End Node. AIS01-LB has a camera and AI processor in the probe. It can take photo, analyze the photo to get digital reading and send the info to IoT server via LoRaWAN Network.

AIS01-LB is pre-trained to support image recognized of water meter, gas meter and power meter. It can be trained to support more image recognized for different application.

AIS01-LB can send the digital reading after recognized and it can also send the original photo via LoRaWAN as well.

AIS01-LB is fully compatible with LoRaWAN v1.0.3 protocol, it can work with standard LoRaWAN gateway.

The Dragino S31-CB and S31B-CB are NB-IoT/LTE-M Temperature and Humidity Sensor for Internet of Things solution. It is used to measure the surrounding environment temperature and relative air humidity precisely, and then upload to IoT server via NB-IoT or CAT-M1 network.

The temperature & humidity sensor used in S31-CB / S31B-CB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a waterproof anti-condensation casing for long term use.

S31-CB / S31B-CB supports different uplink methods include MQTT, MQTTs, TCP, UDP or CoAP for different application requirement, and support uplinks to various IoT Servers.

S31-CB / S31B-CB is powered by 8500mAh Li-SOCI2 battery, It is designed for long term use up to several years. (Real-world battery life depends on the use environment, update period and uplink method. Please check related Power Analyze report).

S31-CB / S31B-CB has the optional build-in SIM card and default IoT server connection version. Which make it works with simple configure.