The Dragino SE02-LB is a LoRaWAN Soil Moisture & EC Sensor for IoT of Agriculture which has 2 sensor probes. It is designed to measure the soil moisture of saline-alkali soil and loamy soil. The soil sensor uses FDR method to calculate the soil moisture with the compensation from soil temperature and conductivity. It also has been calibrated in factory for Mineral soil type.

It detects Soil Moisture, Soil Temperature and Soil Conductivity, and uploads the value via wireless to LoRaWAN IoT Server.

The LoRa wireless technology used in SE02-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.

SE02-LB supports BLE configure and wireless OTA update which make user easy to use.

SE02-LB is powered by 8500mAh Li-SOCI2 battery it is designed for long term use up to 5 years.

Each SE02-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.

The Dragino SE02-NB is a NB-IoT Soil Moisture & EC Sensor for IoT of Agriculture which has 2 sensor probes. It is designed to measure the soil moisture of saline-alkali soil and loamy soil. The soil sensor uses FDR method to calculate the soil moisture with the compensation from soil temperature and conductivity. It also has been calibrated in factory for Mineral soil type.

It detects Soil Moisture, Soil Temperature and Soil Conductivity, and uploads the value via wireless to NB-IoT IoT Server.

SE02-NB supports different uplink methods including MQTT, MQTTs, UDP, TCP or CoAP for different application requirement, and support uplinks to various IoT Servers.

SE02-NB supports BLE configure and OTA update which make user easy to use.

SE02-NB is powered by 8500mAh Li-SOCI2 battery, it is designed for long-term use up to several years.

SE02-NB has optional built-in SIM card and default IoT server connection version. Which makes it works with simple configuration.

PB01 LoRaWAN Button is a LoRaWAN wireless device with one push button. Once user push the button, PB01 will transfer the signal to IoT server via Long Range LoRaWAN wireless protocol. PB01 also senses the environment temperature & humidity and will also uplink these data to IoT Server.

PB01 supports  2 x AAA batteries and works for a long time up to several years*. User can replace the batteries easily after they are finished.

PB01 has a built-in speaker, it can pronouns different sound when press button and get reply from server. The speaker can by disable if user want it.

PB01 is fully compatible with LoRaWAN v1.0.3 protocol, it can work with standard LoRaWAN gateway.

*Battery life depends how often to send data, please see battery analyzer.

The Dragino LHT65N/S-DC is a LoRaWAN Dry Contact Sensor is a Long Range LoRaWAN Sensor. It detects dry contact status, open/ close status, counts, and then upload to IoT server via LoRaWAN network. It includes a built-in Temperature & Humidity sensor and 3-wire(VCC/ GND/INT) for dry contact .

LHT65N/S-DC supports open alarm feature, user can set open alarm for instant notice. The sensor supports Datalog feature, it can save the data when there is no network and uplink when network recover.

LHT65N/S-DC supports Datalog feature. It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.

LHT65N/S-DC has a built-in 2400mAh non-chargeable battery which can be used for up to 10 years*.

LHT65N/S-DC is full compatible with LoRaWAN v1.0.3 Class A protocol, it can work with a standard LoRaWAN gateway.

*The actual battery life depends on how often to send data, please see battery analyzer chapter.

The Dragino LHT65N/S-DS Door Sensor is a Long Range LoRaWAN Sensor. It includes a built-in Temperature & Humidity sensor and a metal Door Sensor.

The LHT65N/S-DS allows users to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, building automation, and so on.

LHT65N/S-DS has a built-in 2400mAh non-chargeable battery which can be used for up to 10 years*.

LHT65N/S-DS is full compatible with LoRaWAN v1.0.3 Class A protocol, it can work with a standard LoRaWAN gateway.

*The actual battery life depends on how often to send data, please see battery analyzer chapter.

The Dragino AQS01-L is an Indoor LoRaWAN Air Quality Sensor for the Internet of Things solution. It is designed to measure the surrounding environment parameters include: CO2, Temperature , Relative Air Humidity and Air pressure, and then upload to IoT server via LoRaWAN wireless protocol.

AQS01-L is powered by a ER18505 4000mAh battery. The battery can last more than 2 years and is easy to change.

AQS01-L supports BLE configure and wireless OTA update which make user easy to use.

AQS01-L supports CO2 Alarm and Temperature Alarm* features, users can get an alarm for instant notice.

AQS01-L supports Datalog feature, User can retrieve the sensor data from LoRaWAN commands.

Note*: CO2 Alarm and temperature Alarm will decrease a lot the battery life.

Dragino LCC01-LB is a LoRaWAN Load Cell Converter for IoT solutions. It is used to accurately measure the weight of objects and then upload it to the IoT server through the LoRaWAN wireless protocol.

The LCC01-LB has a standard 4-wire interface which can connect to different type of load cell. It supports different scaling from gram to ton.

With LCC01-LB and a suitable load cell, user can build up a weight measurement loT solution. Applications are suitable for such as: truck scales, railway scales, supermarketscales, bench scales, heavy duty scales or any type of standard scale.

The LoRa wireless technology used in the LCC01-LB allows the device to send data at low data rates and reach extremely long distances. It provides ultra-long-distance spread spectrum communications and high interference immunity while minimizing current consumption.

LCC01-LB supports BLE configure and wireless OTA update which make user easy to use.

LCC01-LB is powered by 8500mAh Li-SOCI2 battery , which can last up to 5 years of long-term use.

Each LCC01-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to LoRaWAN server and it will auto connect after power on.

The Dragino CS01-LB is a 4 Channels Current Sensor Converter. It can convert the reading from current sensors and upload to IoT server via LoRaWAN Network.

CS01-LB can be used to monitor the machine running status and analyze power consumption trends.

The CS01-LB supports maximum 4 current sensors. The current sensors are detachable and can be replaced with different scales.

CS01-LB supports BLE con­figure and wireless OTA update which makes user easy to use.

CS01-LB is powered by 8500mAh Li-SOCI2 battery , it is designed for long-term use up to several years.

The Dragino TC01/TC11-LB is a LoRaWAN Thermocouple Converter for Internet of Things solution. It is used to measure the industrial environment temperature , and then upload to IoT server via LoRaWAN network.

The TC11-LB used in K-Type thermocouple can measure -50°C ~ 200°C. TC01-LB is with 2 open wire so user can connect a 3rd party K, J, N, R,S T, E, or B type thermocouple.

TC01/TC11-LB supports temperature alarm feature, user can set temperature alarm for instant notice. TC01/TC11-LB supports Datalog feature，It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.

TC01/TC11-LB supports BLE configure and wireless OTA update which make user easy to use.

TC01/TC11-LB is powered by 8500mAh Li-SOCI2 battery , it is designed for long-term use up to several years.

Each TC01/TC11-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.