Dragino BH01-LB/LS BLE to LoRaWAN Hub is an edge communication node device designed for loT applications. It uses the BLE Bluetooth module to periodically scan and collect data from surrounding Bluetooth temperature and humidity sensors (such as BCN02, iBeasons or third-party BLE sensors), and then uses the LoRaWAN protocol to transmit the data over long distances to the cloud platform, achieving seamless connection between Bluetooth devices and low-power wide area networks.

BH01-LB/LS is a BLE to LoRaWAN Hub which can turn BLE devices to LoRaWAN devices. This feature can help system intergrator has widely choice in sensor selection and simplify the network structure.

It is suitable for cold chain warehouse monitoring, smart agricultural environment monitoring, asset tracking and urban infrastructure health management. It combines the fexibility of Bluetooth and the wide coverage of LoRaWAN. Compared with wifi connection, it can siginifcantly reduce the deployment cost of the Internet of Things.

BH01-LB/LS has a built-in BLE module, user can configure the sensor remotely via Mobile Phone. It also support OTA upgrade via private LoRa protocol for easy maintaining.

BH01-LB/LS is powered by 8500mA Li/SOCl2 battery or solar panel with Li-ion battery for long term use.

The Dragino RS485-CB is a RS485 / UART to NB-IoT/LTE-M Converter for Internet of Things solutions. User can connect RS485 or UART sensor to RS485-CB converter, and configure RS485-CB to periodically read sensor data and upload via NB-IoT/LTE-M network to IoT server.

RS485-CB can interface to RS485 sensor, 3.3v/5v UART sensor or interrupt sensor. RS485-NB provides a 3.3v output and a 5v output to power external sensors. Both output voltages are controllable to minimize the total system power consumption.

RS485-CB supports different uplink methods including MQTT, MQTTs, UDP, TCP or CoAP for different application requirement, and support uplinks to various IoT Servers.

RS485-CB supports BLE configure and OTA update which make user easy to use.

RS485-CB is powered by 8500mAh Li-SOCI2 battery, it is designed for long-term use up to severa years.

RS485-CB has optional built-in SIM card and default IoT server connection version. Which makes it works with simple configuration.

PB05-L LoRaWAN Push Button is a LoRaWAN wireless device with Five push buttons. Once the user presses the button, the PB05-L will transmit the signal to IoT server via Long Range LoRaWAN wireless protocol.

PB05-L is shipped with a default PVC stick with satisifed icons.The sticker is not attached to the design for easy customized purpose.User can design customized PVC sticker and change the panel design.

PB05-L supports 2 x AA batteries and and can up to about 30k pushes(Key1~Key5). User can replace the batteries easily after they are fnished.

PB05-L has a built-in speaker, it can pronouns different sound when press button and get reply from server. The speaker can by disable if user want it.

PB05-L is fully compatible with LoRaWAN v1.0.3 protocol, it can work with standard LoRaWAN gateway.

LTS5 is a LoRa / LoRaWAN HMI Touch Screen designed for display purpose of IoT project. It have a 5.0" HMI touch screen, and support WiFi, Bluetooch, LoRa wireless protocol.

LTS5 is an Open Source software project. The MCU is ESP32 and Dragino LA66 LoRa module. There are lots of development source for ESP32 which can greatly reduce the development time.

The HMI touch screen of LTS5 supports drap & drop design. Developer can use SquareLine to easily customize the display UI for diferent application.

LTS5 use LA66 LoRa module, this module can be program to support private LoRa protocol or LoRaWAN protocol.

The Dragino T68DL Temperature sensor is a Long Range LoRaWAN Sensor with IP68 waterproof rating.

The T68DL allows users to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, building automation, and so on.

T68DL has a built-in 2400mAh non-chargeable battery which can be used for up to 10 years*.

T68DL is full compatible with LoRaWAN v1.0.3 Class A protocol, it can work with a standard LoRaWAN gateway.

T68DL supports Datalog feature. It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.

*The actual battery life depends on how often to send data, please see battery analyzer chapter.

The Dragino SE0X-LB is a LoRaWAN Soil Moisture & EC Sensor for IoT of Agriculture which can equipped with 4 sensor probes. It is designed to measure the soil moisture of saline-alkali soil and loamy soil. The soil sensor uses FDR method to calculate the soil moisture with the compensation from soil temperature and conductivity. It also has been calibrated in factory for Mineral soil type.

It detects Soil Moisture, Soil Temperature and Soil Conductivity, and uploads the value via wireless to LoRaWAN IoT Server.

The LoRa wireless technology used in SE0X-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.

SE0X-LB supports BLE configure and wireless OTA update which make user easy to use.

SE0X-LB is powered by 8500mAh Li-SOCI2 battery , it is designed for long-term use up to several years.

Each SE0X-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.

The Dragino LHT65N-VIB LoRaWAN Vibration Sensor is designed to detect and measure vibrations, shocks, or accelerations of an object. By analyze the motion of the object, LHT65N-VIB can send meaningful resulte such as: Alarm, device runtime, counting, vibration strenght to IoT platform for further analyze.

It targets professional wireless sensor network applications such as monitoring equipment status, water leakage alarm, usage statistics, vibration intensity detection, etc.

The LHT65N-VIB allows users to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.

LHT65N-VIB has a built-in 2400mAh non-chargeable battery which can be used for more than 3 years*.

LHT65N-VIB is fully compatible with LoRaWAN v1.0.3 Class A protocol, it can work with a standard LoRaWAN gateway.

*The actual battery life depends on how often to send data, please see battery analyzer chapter.

The Dragino LDS25-NB is a LiDAR ToF (Time of Flight) Distance Auto-Clean Sensor for Internet of Things solution. It is capable of measuring the distance to objects as close as 0m to 25m. The LiDAR probe uses laser induction technology for distance measurement.

It has a unique dust removal brush structure built in, and the radar drives the dust removal brush to complete the optical mirror dust removal operation, and the user can customize the dust removal confguration.

The Dragino LDS25-NB can be applied to scenarios such as horizontal distance measurement, Ore Material Monitoring, object proximity and presence detection, Industrial Material Monitoring, Feed Crop Monitoring, automatic control,etc.

It detects the distance between the measured object and the sensor, and uploads the value via wireless to NB-IoT Server.

LDS25-NB supports different uplink methods including MQTT, MQTTs, UDP ,TCP or CoAP for different application requirement, and support uplinks to various IoT Servers.

LDS25-NB supports BLE configure and OTA update which make user easy to use.

LDS25-NB is powered by 8500mAh Li-SOCI2 battery, it is designed for long-term use up to several years.

LDS25-NB has optional built-in SIM card and default IoT server connection version. Which makes it works with simple configuration.

The Dragino LDS25-LB/LS is a LiDAR ToF (Time of Flight) Distance Auto-Clean Sensor for Internet of Things solution. It is capable of measuring the distance to objects as close as 0m to 25m. The LiDAR probe uses laser induction technology for distance measurement.

It has a unique dust removal brush structure built in, and the radar drives the dust removal brush to complete the optical mirror dust removal operation, and the user can customize the dust removal confguration.

The Dragino LDS25-LB/LS can be applied to scenarios such as horizontal distance measurement, Ore Material Monitoring, object proximity and presence detection, Industrial Material Monitoring, Feed Crop Monitoring, automatic control,etc.

It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN Server.

It supports BLE confgure and wireless OTA update which make user easy to use.

The Dragino LDS25-LB/LS is powered by 8500mAh Li-SOCI2 battery or solar powered + Li-ion battery, it is designed for long-term use up to several years.

The Dragino WQS-CB is a Main Unit is advanced instruments designed for comprehensive water quality monitoring across various applications. They are ideal for monitoring tap water, industrial water, environmental water, and wastewater,etc,which ofer precise and reliable measurements to ensure water quality standards are met.

The Dragino WQS-CB is a Main Unit supports 1-3 probes. supports connecting 1 to 3 water quality probes, including EC, pH, DO, ORP, and TS probes.

 It detects water quality parameters, and uploads the value via wireless to NB-IoT/CAT-M1 Server.

WQS-CB supports BLE con­figure and wireless OTA update which makes user easy to use.

WQS-CB is powered by 8500mAh Li-SOCI2 battery , it is designed for long-term use up to several years.